Click on the image to check the artwork
By certification 
Transparent silicone rubber Characteristics
* Low shrinkage (less than 0.1% )
* High tensile and tear strength with high copy times
* Hing heat resistance which can up to 250 °C
* Easy for operation (mixing ratio at 1:1 /10:1)
* Very good flow and easy for pouring operation
* Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Transparent silicone rubber Technical Parameters
Model HY 2135 HY 2235
Appearance Transparent High transparent
Mix ratio 10:1 10:1
Viscosity (cps) 70000 70000
Pot life(hrs) >2-3h >2-3 h
Curing time(°C/min) 100-120°C/30mins 100-120°C/30mins
Density
/ g·cm-3 1.1 1.1
Hardness(A0) 35 35
Enlongation(%) ≥280 ≥320
Tear strength (KN·m-1) ≥15 ≥18
Tensile strength (Mpa) ≥4.8 ≥5.2
Shrinkage (%) 0.1 0.1
(Note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
* Low shrinkage (less than 0.1% )
* High tensile and tear strength with high copy times
* Hing heat resistance which can up to 250 °C
* Easy for operation (mixing ratio at 1:1 /10:1)
* Very good flow and easy for pouring operation
* Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Transparent silicone rubber Technical Parameters
Model HY 2135 HY 2235
Appearance Transparent High transparent
Mix ratio 10:1 10:1
Viscosity (cps) 70000 70000
Pot life(hrs) >2-3h >2-3 h
Curing time(°C/min) 100-120°C/30mins 100-120°C/30mins
Density
/ g·cm-3 1.1 1.1
Hardness(A0) 35 35
Enlongation(%) ≥280 ≥320
Tear strength (KN·m-1) ≥15 ≥18
Tensile strength (Mpa) ≥4.8 ≥5.2
Shrinkage (%) 0.1 0.1
(Note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
